Stamp-a-ma-jig Tutorial - Page 3 - Written by Susan M. Trask for smARTworks
 
All text, images and designs on this site copyrighted by smARTworks 2005-2011
clr-next.jpg
smartsite033001.jpg
jige.jpg
jigf.jpg
Without disturbing the stamping surface or jig, carefully remove the PIS.
Its work is done.
 
Also, at this stage, keeping a hand on the jig is unnecessary.  It is only
important that the jig not be moved...
 
Should stamping surface or jig get bumped or moved, it is imperative to return to
Step #3, and reposition everything.
jigg.jpg
Ink stamp as desired..
 
Holding jig in place with the non-stamping hand, and remembering to slide edges and corner of mount
snugly down into jig's "L," stamp image.
 
Once the stamp has made contact with the surface being stamped, ou can let go of the jig.
jigh.jpg
Ta dah! 
Image has been stamped exactly where previewed!
 
Remove jig.  Wipe off the PIS for next time.
Holding  the PIS in position and slide the jig back into place.